TLSprog REnew+Eeprom+Adaptation+Renew Pcf 79xx

V.1 RENEW:
Identification and restoration (cleaning to a new state) of smart keys Toyota-Lexus-Subaru.
After recovery, the key is programmed and added as new.
Key recovery occurs without soldering.
Works with all types of smart keys 40 BIT DST / 80 BIT DST + / 128 BIT DST-AES.
And also with all types of PAGE 1-94 /9F /D4 /78 /88 /98 /A8 /A9 / AA / 39 / F1 / F3 .
V.2 eeprom
Key programming only by smart block. (Immobilizer removal is not required). After programming the key, the KEYLESS GO system and the central locking function work automatically.
Resetting smart unit and immobilizer dumps (RESET)
V.3 ECU ADAPTATION
Synchronization recovery between the smart unit and the immobilizer.
No removal of the immobilizer from the car is required.
Functions of the device:
Check the status of the key (new or CU).
Restore all functions of a new key.
Automatic key type detection ( PAGE 1-94 /9F /D4 /78 /88 /98 /A8 /A9 / AA / 39 / F1 / F3 ).
Work with all types of keys (40 bit-DST / 80 bit-DST + / 128 bit-DST-AES).
Simple programming solution.
The key after recovery, is programmed as new.
Simple and fast solution for the complete loss of keys.
Programming only by smart block.
No soldering required.
The removal of the immobilizer from the car is not required.
After programming, the Key Less Go system and the central locking function immediately work.
Immobilizer reset (93c46, 93c56). Smart unit zeroing (93c66, 93c86, 93c86 for the Japanese market).
Simple and intuitive interface. Auto erase lost keys.
Does not require additional power. Does not require special skills.
Read and write EEPROM without additional programmers.
Visualization dump.
Automatic dump check for correct reading.
Adaptation of a used smart unit with an immobilizer (without removing the immobilizer from the car).
Adaptation of used smart blocks of the latest generation (key Page 1- A9) with immobilizer (without removing the immobilizer from the car).
Key resetting with PCF 79XX chips.