Lukey 702

Installation and repair of modern electronic devices requires the presence of a soldering station. Such equipment is manufactured by many well-known manufacturers, but professional electronics engineers, and even radio amateurs, prefer to work with the Lukey 702 soldering station. They appreciate its reliability, durability, and ease of use. The positive qualities include a rather small size, a wide range of operating temperatures. Thermo-air station: description, features Thermo-air station allows pre-heating, disassembling of elements, plastic soldering, drying and a number of other necessary for repair and installation of electronic devices, works. The equipment has a small weight and dimensions, the temperature mode of the soldering iron, the heat gun is regulated using special buttons. The model is convenient in operation: there are no vibrations, the air enters in large quantities, the minimum working area is required for operation. This is achieved due to the absence of a thick hose, as well as the successful design of the model - the heating element with a compressor is located in the handle of the dryer. In the Lukey 702 soldering station, cooling takes place in an automatic mode, thereby ensuring a long service life for the heating element. When placing the station on the stand triggered shutdown system. The instruction manual (language - Russian) is included in the delivery package. Lukey 702 soldering station: main advantages The model has a number of advantages, among which are: The ability to quickly change the nozzles, even when the elements are not completely cooled. To make such a manipulation allows the absence of screws when fixing nozzles. Antistatic function is provided that excludes emergence of the electric discharge. The small weight and dimensions provide convenience, both of transportation and operation of the Lukey 702 thermo-air station. Saving of electricity due to disconnection from the network when the station is in an idle state - the inactive state function is in effect. Sophisticated design - for the thermophone and soldering iron, special supports are provided that ensures comfortable operation. Good value for money. Due to the circular impeller, the device receives sufficient air flow and there is practically no noise effect. In a hot-air station, certain temperature parameters are supported, and therefore there is no need to introduce new ones. The Lukey model provides almost instant heating of the hair dryer, a soldering iron - the heating time is less than one minute. The model can be used by both large service centers and private entrepreneurs. Main technical characteristics: Power is supplied from the mains with a voltage of 220 V Parameters of the output voltage: 29 V, 10 V, 26 V Power consumed by the station, W: 750 Soldering iron works in the temperature range 200-480 ° C The hair dryer works in the temperature range 100-480 ° C The heating element of the soldering iron has a ceramic coating. Turbine pump The maximum air flow rate is 120 l / min. The noise level is below 45 dB. The weight of the station does not exceed 1.5 kg. Delivery set: Station Lukey-702 equipped with hairdryer -1 pc; Soldering iron -1 pc; Soldering iron stand -1 pc; Nozzles for the heat gun -1 pc; Holder for heat gun -1 pc; Key for removing hair dryer nozzles -1 pc; Operating instructions -1 pc; A packing box equipped with a protective frame made of foam plastic -1 pc; Delivery Delivery Lukey 702 is carried out in any point of Russia. Transportation of equipment is possible in any way convenient for you. These can be courier or transport companies, Russian post or other organizations. The cost and time of delivery depends on the amount of equipment ordered and the location of the destination. As the official distributor of Lukey, a manufacturer of soldering equipment, as well as consumables, we inform you that when you buy a Lukey 702, a free warranty service is provided to the station for 6 months.