VN002 Parts Adaptation Special Function

Extracting and displaying immobilizer Ability for alignment of related data - cluster / ecu. It is a display of immobilizer.

Read / Update memory card for VDO dashboards with NEC microcontroller (2009+) by OBDII EDC16, MED9.x, Simos PPD 1.1 / 1.5, Magneti Marelli 4HV, 7GV. Emergency start for engine control units EDC16.

The whole EEPROM could be read for EDC15 / ME7 / EDC16. For MED9 and Simos engine control units only the PIN / CS / MAC is displayed. Advanced Diagnostic Functionality - Electronic Control Unit. Read / Update Config Data of Siemens airbag control units (CAN bus - ISO15765). Audi A6 / Q7 / Allroad, VW Golf5 ..., Skoda Octavia II ..., Seat Altea ... ConfData memory of the airbag module. Clear the crash data of the airbag module. Covered units for Read / Update ConfData: 1. All Siemens CAN Airbags 2003-2008 like 4F0959655B (Audi A6 / Q7 / Allroad 2003-2008), 1K0909605AB, 1K0909605C, 1K0909605AD, etc ... 2. K-Line Airbags (Siemens and Bosch) - 1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 605 C, 6Q0 909 605 A, 6Q0 909 605 B, 3B0 959 655 B, 1C0 909 605 F, 1C0 909 605 H, 1J0 909 607 , 1J0 909 603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C, 8L0 959 655 F, 8A0 959 655 C, 8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, Audi A4, S4, RS4, A5, S5, RS5, A6, A7, A8, Q5 / VW Touareg + ILM. ) - Audi A8 2003-2010 Component protection for Audi A6 / Q7 2004-2009 by Audi A6 / Q7 2004-2009 for Audi A6 / Q7 2004-2009 by Audi A6 / Q7 2004 -2009 by OBDII Airbag Audi A4 / A5 / Q5 2008+ from Bosch by OBDII Instrument cluster Audi A6 / Q7 2004 -2009 by OBDII Instrument Cluster Audi A4 / A5 / Q5 2008+ by OBDII Infotainment electr. Audi A4 / A5 / Q5 2008+ by OBDII - All Other Modules (eg DSP) for A6 / Q7 2004-2009 and A4 / A5 / A5 EDC16, EDC17, MED17, MED9, Simos PPD, ME7.5.20, ME7.5.30 Kessy Audi A8 / VW Touareg / Phaeton VPS Passat B6 / CC Transmission gearbox Audi A6 / Q7 / Allroad / A8 EZS-Kessy Audi A6 / Q7 / Allroad BCM2 immobilzier - Audi A4, S4, RS4, A5, S5, RS5, A6, A7, A8, Q5 / VW Touareg + control units. It is possible to read the engine. It will be possible to read through it. control unit. It is possible to connect only 12V, GND, Ignition, CAN-H and CAN-L. It is possible to find the CAN-H (orange-black) and CAN-L (orange-brown) wires. So you can read the engine control units. + adapt the transmission control unit (TCU) to the immobilizer (BCM2). For that purpose, it’s necessary to read the TCU. It is not possible to make a note of the car. CAN-Bus, CAN-H (PIN6 of the OBDII) -Orange / CAN-L (CAN PIN14 of the OBDII) - Ground GND (PIN4 of the OBDII) - 12V 12V (PIN16 of the OBDII) + reading the PIN / CS / MAC of the Simos PCR 2.1 engine control unit. ATTENTION: This function requires an internet connection. This function includes the following functions: AN043, AN045 AN046, AN047, AN048, AN049, AN052, AN053, AN055, AN056, AN057, AN058.

If you have one or more of these functions please contact us at order@originalkey.ru mail and we will be able to calculate the amount you need to pay to get the VN002 package.

A new AVDI interface or active AMS is required to purchase this package.