Update from TN005 to TN007

Support for new types of Smart Access systems for reset diagnostics. * The function of reading EEPROM from Smart Access via OBD2. * Function to prepare the key without having to do a reset or master key. Available for cars on DST40 smart keys (most keys that were used until 2011). * Completely new "Dump tool" special function with automatic dump detection and a wide range of functions like resetting the computer, resetting the immobilizer, resetting the smart system, preparing the key by dumping, adjusting the odometers, resetting the SRS. * Special function-ECU memory manager. This allows reading through HBS FLASH / EEPROM engine control units manufactured by BOSCH (1ND-TV 1.4 D4D, 4ZZ-FE 1.4, 1KR-FE 1.0, 1NR-FE 1.33, 1SZ-FE 1.0). Flash programming is available for 1ND-TV engines. * A special function "Key lerning" allows you to prepare a master key for the models with a built-in immobilizer in the engine control unit, which uses keys with a 4C chip, through the HBS. No more need to remove and disassemble ECU. Available in ECU (1ND-TV-EDC15 1.4 D4D, 4ZZ-FE 1.4, 1KR-FE 1.0, 1NR-FE 1.33, 1SZ-FE 1.0) in Toyota cars: Corolla, Yaris, Auris, iQ, RunX 140, Echo, Verso S, Urban Cruiser. * Reset some smart systems and immobilizers with Texas DST128 through diagnostics. * Registration of keys with Texas DST128 through diagnostics. * Dump on dump of all types of immobilizers and Smart modules with Texas DST128. * Master key programming on the Smart dump of a module with Texas DST128. TagProgrammer is required. * Master key programming through the diagnostics of Smart DST40 systems without the need to do a reset. TagProgrammer and TA7 transponder required. * Updated DTCs, live data, actuator tests.